Product Features This product is mainly composed of high-grade cement, aggregate, and a variety of hard superfine organic polymer additive complex processing. Has a good flow pattern, high viscosity, strong bond and other characteristics, can be applied to a variety of grassroots ground cushion material. Applications Recommended for preparing paving screed treated wood flooring, carpet, PVC rubber flooring and other substrates. And have been leveling epoxy coating requirements or other requirements of the base or floor dust-proof requirements. Such as: residential, office buildings, hospitals, shopping malls and other ground. Technical indicators meet JC / T985-2005 Standard construction techniques, primary treatment: 1, the primary pre-construction concrete strength shall ≥C20, rugged places, cracks and holes should be pre-treated smooth, then scattered debris in the basal plane cleaned, the surface must be hard, smooth and clean. 2, the grass-roots moist concrete surface water and to ensure that no attached water pouring front layer. 3, Portland cement concrete base required in new construction for 21 days a new self-leveling concrete base construction, sulfur cement construction should be carried out after the completion of seven days before leveling construction. Second, the material preparation: 1, when a small area or road construction, available in small electric blender, stirring in the barrel, stirring once every full package required material; large-scale construction, available high-speed mixer mixing, pumping mortar method of construction. 2. Mixing Method: The amount of water into the bucket, the stirrer stirring slowly adding a packet of self-leveling, stirring 4-5min, still 1min later, again stirring until evenly without group slurry can be. Under cold conditions, to use warm water (not more than 40 ℃) stirring. 3, the construction temperature should be above 5 ℃, preparation of a good self-leveling mortar should be used within 35min. Third, pouring and leveling construction: 1, the stirred pouring self-leveling, evenly spread, with a special mouth tooth scraper to control the thickness, the thickness of the construction product ≥3mm, a construction thickness 3 ~ 30mm, the reference amount 1.6 kg / m / mm. 2, construction workers can put spikes into the construction ground, with tooth scraper mouth mortar surface evenness, to eliminate the dumping of convergence at the injustice, and to maintain the desired thickness. 3, with a deflated gently rolling roller to eliminate air bubbles when stirred. Fourth, conservation: under normal temperature conditions according to general conservation mortar shall be taken watering wet or covered with sacks, mats and other measures to conserve high or low temperature for 1-3 days after the initial case hardening. Severe traffic ground maintenance required three days before passage. Packaging and storing a packaging specifications 25kg ± 0.5kg / bag. Store in a cool dry environment, avoid exposure. Rain. Moisture, shelf life of 12 months. 2, non-toxic, tasteless, non-polluting, non-dangerous goods, according to general cargo transport. Solemnly declare that this product beyond the control of the manufacturer, the Company does not assume any liability arising as a result of improper use, please refer to this manual when using related questions, please contact our technical service department.